Wurth 5918605585 CHEMICAL INJECTION MORTAR PURE EPOXY WIT-PE 1000 585ml

Pure epoxy mortar with a long processing time, ideal for large anchoring depths and drilling holes as well as high temperatures. For bonded anchor, concrete and post-installed rebar connection with subsequent mortaring (REBAR)
Two-component reactive resin mortar, pure epoxy
Individual fixing point in cracked and uncracked concrete, seismic performance category C1 (M8 to M30) and C2 (M12 to M30): Anchor rod W-VI-A, anchor rod W-VD-A, standard threaded rod with acceptance test certificate 3.1, female thread anchor W-VI-IG
Areas subject to the German Federal Water Act (Wasserhaushaltsgesetz – WHG): Würth WIT-PE 1000 injection system (bonded anchor), anchorage in coated concrete surfaces in SFH facilities
Post-installed rebar connection
Anchoring of threaded rods in natural stone (without approval/assessment)
Proof of Performance
European Technical Assessment ETA-19/0542: Individual fixing point + cracked and uncracked concrete (anchor rod W-VI-A, anchor rod W-VD-A, standard threaded rod with acceptance test certificate 3.1, female thread anchor W-VI-IG), seismic performance category C1 (M8 to M30) and C2 (M12 to M30)
European Technical Assessment ETA-19/0543: Post-installed rebar connection (REBAR)
European Technical Assessment ETA-23/0421: Post-installed rebar connection with improved bond and splitting failure when subjected to static action
General type approval Z-74.8-219: “WIT-PE 1000 injection system for concrete” fastening system for use in coated concrete surfaces in SFH facilities (anchorage in sealing surfaces subject to the German Federal Water Act)
General type approval Z-21.8-2156: Post-installed rebar connection subject to fatigue-inducing action
EPD: Environmental product declaration in accordance with ISO 14025 and EN 15804+A2, EPD-AWU-20230504-CBA4
Leak test, 7 bar water pressure: MFPA Leipzig GmbH, test report no. PB 5.1/20-424-2
Fire resistance when exposed to fire in accordance with DIN EN 1363-1: Cracked and uncracked concrete, Ingenieurbüro Thiele Tragwerksplanung GmbH
Application area
Suitable for attaching metal structures, metal profiles, wooden structures, brackets etc.
Suitable for structural expansions, ceiling and wall attachments, expansion of load-bearing structures, reinforcement of load-bearing structures, attachment of balconies and canopies, sealing of temporary openings and “forgotten” reinforcement bars
Type description

WIT-PE 1000

Container

Cartridge

Contents

585 ml

Suitable application gun

Battery-powered application gun 585ml
Application gun MULTI
Pneumatic application gun 585ml
HandyMax 585 ml

Min./max. processing temperature /conditions

0 to 40 °C / temperature in the anchorage ground during processing and hardening

Min./max. ambient temperature / Conditions

-40 to 72 °C / after completely curing process

Temperature resistance, long-term temperatures max.

24 °C

Temperature resistance, short-term temperatures max.

72 °C

Shelf life from production/conditions

24 Month / cool and dry storage area, 5°C to 25°C

Approval

ETA-19/0542
ETA-19/0543

Chemical basis

Pure-Epoxy, styrene free

Colour

Grey