Wurth 5918615585 INJECTABLE MORTAR WIT-PE 510 585ml

Standard pure epoxy mortar (long processing time, deep effective anchorage depths). For bonded anchor, concrete and post-installed rebar connection with subsequent mortaring (REBAR)
Two-component reactive resin mortar, pure epoxy, styrene-free

Fixing point, cracked and non-cracked concrete M8 to M30:

Anchor rod W-VI-A, anchor rod W-VD-A, standard threaded rod with acceptance test certificate 3.1

Post-installed rebar connection with subsequent mortaring

Cartridge can continue to be used until the best before date, by changing the mixer nozzle or resealing it with the end cap

Anchoring of threaded rods in natural stone (without approval/assessment)

Proof of Performance
European technical assessment ETA-20/1038: Individual fixing point + cracked and uncracked concrete (anchor rod W-VI-A, anchor rod W-VD-A, standard threaded rod with acceptance test certificate 3.1)
European technical assessment ETA-20/1037: Post-installed rebar connection with subsequent mortaring (REBAR)
Application area
Suitable for attaching metal structures, metal profiles, wooden structures, brackets, pipes, cable conduits, etc.
Suitable for structural expansions, ceiling and wall outlets, expansion of load-bearing structures, reinforcement of load-bearing structures, attachment of balconies and canopies, sealing of temporary openings and “forgotten” reinforcing bars

Container

Cartridge

Contents

585 ml

Suitable application gun

HandyMax 585 ml
Application gun MULTI
Pneumatic application gun 585ml
Battery-powered application gun 585ml

Min./max. processing temperature /conditions

5 to 40 °C / temperature in the anchorage ground during processing and hardening

Min./max. ambient temperature / Conditions

-40 to 70 °C / after completely curing process

Temperature resistance, long-term temperatures max.

43 °C

Temperature resistance, short-term temperatures max.

70 °C

Shelf life from production/conditions

24 Month / cool and dry storage area, 5°C to 25°C

Approval

ETA-20/1037
ETA-20/1038

Chemical basis

Pure-Epoxy, styrene free

Colour

Grey