“WURTH 0893603025 HIGH-STRENGTH BEARING LOCKING 25g.” has been added to your cart. View cart
Description
The 3D GLW Series Odor Eliminator is a game-changing solution designed to swiftly and effectively neutralize and eliminate a wide range of unpleasant odors, leaving behind a refreshing and rejuvenating scent. Whether it’s lingering food smells, pet odors, cigarette smoke, or any other unwanted fragrances, this powerful odor eliminator targets the source and eradicates them completely.
- Eliminates Odors, Don’t Mask Them
- Safe on All Surfaces
- Leaves a Fresh, Clean Scent
- Eco-Friendly and Biodegradable
- Made in the USA
Related
Reviews (0)
Be the first to review “3D GLW Series Odor Eliminator 473ml.” Cancel reply
Related products
BMW 13 71 7 792 090 Seal Ring, charge air hose
BMW 16 11 7 666 735 Fuel hose connector
Wurth 071458245 ASSEMBLY WEDGE SET 12 PIECES
Wurth 0893500052 2C PLASTIC ADHESIVE REPLAST® ME 210 SEC.
29.80€
An adhesive for virtually every type of plastic
Easy to handle various adhesive types
Can be used for repairs and structural bonding
Certified in accordance with NSF P1 and EMICODE EC1+
Special shorter positive mixer
Optimum mixing with minimum volumes
Little adhesive wastage
Repair compound cures quickly, is flexible and can be sanded in a very short amount of time
Excellent chemical resistance to a range of liquids, such as petrol, a large number of lubricating oils and ethyl acetate
Our products featuring the EMICODE label are low emission/environmentally compatible. The EMICODE classification system awards labels to construction products that comply with the very stringent health and environmental requirements of recognised institutes.
Notice
Not suitable for PE (polyethylene), PP (polypropylene) or PTFE (polytetrafluoroethylene). There may be adhesion problems in individual cases due to the coatings and release agents used in some cases in the plastic production process. Check material compatibility on a non-visible area if necessary.
The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. If our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.
Wurth 0894910 12mm x 10m DECORATIVE TRIM ADHESIVE TAPE
For securing decorative and practical trims, emblems, lettering, panels and brackets in the automotive industry. In conjunction with mechanical fastening elements for securing spoilers.
Excellent adhesion
The tape offers excellent application reliability as soon as it is fitted. A very high final strength is achieved after a bonding time of 24 hours
Adheres very well even to rough and slightly uneven substrates
Foam backing
The tape dampens vibrations and enables the various expansion behaviours of different materials to be compensated.
High degree of resistance to temperatures, UV and weathering
The adhesive tape can be used both indoors and outdoors
Does not lose any adhesive force even at elevated temperatures
Notice
Recommended processing temperature 18°C to 35°C
The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further
Application area
For fastening decorative and functional strips, lettering, emblems, panels and brackets in the automotive industry For affixing nameplates to machines In combination with mechanical fastening elements for spoiler mounting
Instructions
The surfaces to be adhered must be dry and free from dust, grease and silicone
To ensure proper adhesion, the tape must be sufficiently pressed to the material to be adhered
Optimum final strength is achieved after 24 hours
With sensitive surfaces (e.g. PP, PE, rubber) and porous surfaces (e.g. wood, stone), please carry out preliminary tests
If plastics containing plasticising additives are to be adhered, the plasticisers may change the adhesive layer. This will impair the strength of the adhesive (preliminary testing required)
Adhesive base
Acrylate
Backing material
Polyethylene foam
Colour
Anthracite (base material)
Thickness
0.8 mm
Adhesive force at 25 mm
19 N
Elongation at break
300 %
Min./max. temperature resistance
-40 to 95 °C
Min./max. surface processing temperature
5 to 40 °C
Min. surface processing temperature
5 °C
Max. surface processing temperature
40 °C
Ultraviolet resistance Yes
Moisture resistance Yes
Conditions to maintain shelf life from production
at 20°C and 50% humidity
Width 12 mm
Length 10 m
Wurth 0899401049 PROTECTIVE GLOVE TIGERFLEX COOL size 9
Universal protective glove with excellent wearing comfort and optimal grip thanks to unique TIGERFLEX® coating
Maximum wearing comfort
- Skin-friendly and soft, seamless, round-knit fabric with a snug fit
- Breathable TIGERFLEX coating made of nitrile foam
- Elastic knitted cuff
Excellent grip and good mechanical strength
Special TIGERFLEX coating
NoticeAutumn version for cool conditions
Wurth 0903450205 WIT-VM 250 420ml
The all-rounder for concrete, masonry and post-installed rebar connections
Two-part reactive resin mortar, styrene-free vinylester
Individual fixing point, cracked and uncracked concrete, seismic performance category C1
Anchor rod W-VI-A, anchor rod W-VD-A, standard threaded rod with acceptance test certificate 3.1
Masonry individual fixing point (system with perforated sleeve WIT-SH):
Perforated sleeve WIT-SH, anchor rod WIT-AS, internally threaded sleeve WIT-IG
Masonry individual fixing point (system with perforated sleeve SH):
Perforated sleeve SH, anchor rod W-VI-A, standard threaded rod with acceptance certificate 3.1
Post-installed rebar connection
Proof of Performance
European Technical Assessment ETA-12/0164: Individual fixing point + cracked and uncracked concrete (anchor rod W-VD-A, standard threaded rod with acceptance test certificate 3.1), seismic performance category C1
European Technical Assessment ETA-13/1040: Individual fixing point + masonry consisting of solid and perforated brick, aerated concrete (perforated sleeve WIT-SH, anchor rod WIT-AS, internally threaded sleeve WIT-IG, aerated concrete only with perforated sleeve WIT-SH 18x95)
European Technical Assessment ETA-16/0757 and ETA-20/0854: Individual fixing point + masonry consisting of solid and perforated brick, aerated concrete (perforated sleeve SH, anchor rod W-VI-A, internally threaded sleeve, threaded rod with acceptance test certificate 3.1, aerated concrete only without perforated sleeve)
European Technical Assessment ETA-12/0166: Post-installed rebar connection, 330 ml, 420 ml, 825 ml cartridges only

Reviews
There are no reviews yet.