XADO XA 20144 Atomic Oil 10W40 SL/CF 1l

PRODUCT DESCRIPTION XADO 1 Stage transmissiongel-revitalizant is an innovative product of XADO third generation revitalizants designed for restoring repair, antiwear protection and lifetime increase of mechanical transmission units and assemblies of a car: mechanical and robotized gear boxes, transfer cases and differentials. Many years of research in sphere of tribology and XADO revitalizants’ application allowed to create a new product, which has optimal dimensionality and activated revitalizant nanoparticles’ concentration. Due to new technology of nanoparticle activation XADO 1 Stage transmission revitalizant is a catalyst of high-speed modification and self-regulated growth of the worn surface. This is a patented compound which will extend the service life of your car and make its operation more convenient and reliable. Restores, protects and strengthens friction surfaces Forms metal-ceramic coating with unique properties on surfaces of tooth gears and bearings Eliminates cavities and scratches on operating surfaces Refines contact patterns in engagements Reduces noise and vibration of units Increases precision of gear shifting Improves operation of synchronizers Provides fuel economy Protects the unit in extreme modes (in case of abnormal oil leakage) Provides optimal conditions for new mechanism’s running in APPLICATION Introduce the compound into the oil filler hole (vent of the oil gauge rod) of the gear mechanism, warmed up to the operating temperature. Then operate the car in normal mode. DOSAGE 27 ml of gel-revitalizant for oil bath of transmission unit with capacity up to 3 L.

XADO Highway Atomic Metal Conditioner is an engine treatment designed for use during every oil change. Highway rebuilds worn metal, reduces friction, and protects treated metal from future wear. Highway contains a much smaller amount of Revitalizant than our Maximum and Tuning products, and it is specially formulated for use during every oil change. Use Highway to rebuild worn metal, reduce friction between moving parts, lubricate metal, and protect an engine from future wear. Highway delivers 5.5% (RF5.5) of the active ingredient, Revitalizant, necessary for a complete revitalization cycle of a vehicle. It also contains a 2D lubricant and a Metal Conditioner. This three-stage process helps reduce friction, increase compression, enhance lubrication, and of course rebuild and protect worn metal. As such it is recommended for use after every oil change to revitalize and protect your engine from wear. Highway works in all gasoline-powered, diesel-powered, and natural-gas powered engines. No matter how well a car is maintained, high heat and friction cause a car’s engine to become worn, scratched, and misshapen over time. Adding XADO Highway Atomic Metal Conditioner to your engine oil rebuilds worn engine metal and coats the rebuild metal at the friction points with a self-regulating layer of ceramic-metal to prevent future wear. XADO’s innovative patented nano-technology is the result of 20 years of research and development. When added to an automobile’s engine oil, Revitalizant rebuilds engine metal at the atomic level, rebuilding worn engine metal, reversing wear, restoring engine geometry, and adding a self-regulating layer of ceramic-metal protection to prevent future wear. XADO Revitalizant does not cake, flake, or alter oil viscosity. This makes it safe to use in even the most sensitive vehicles. XADO’s Revitalizant technology has been independently tested and proven to work. Revitalizant is unlike any other engine treatment, because it actually works to rebuild metal, targeting the source of engine wear instead of merely masking the symptoms. Revitalizant is activated by high heat and friction, so it only repairs metal at high-friction points where metal wear occurs. Revitalizant leaves crank-cases and non-friction metal unaffected. XADO Highway Atomic Metal Conditioner contains 5.5% of the Active ingredient necessary to Revitalize an automobile engine, so it is safe to use every oil change. Application of Atomic Metal Conditioner HighWay with Revitalizant Make sure automobile engine is warmed up to normal operating temperature. Turn off vehicle. Shake bottle of Atomic Metal Conditioner HighWay for one minute and ensure bottle is at room temperature so that contents flow freely. Pour contents into engine oil reservoir. Start car and let engine idle for five minutes. Then drive as you normally would. *Granules with atomic Revitalizant completely dissolve in motor oil at normal operating temperature. Keep out of reach of children. Avoid contact with skin and eyes. If swallowed, seek medical attention immediately and show this container or label to medical personnel. Avoid release into the environment; refer to special instructions/ material safety data sheet. Material safety data sheet is available for professional user on request. Note Atomic Metal Conditioner HighWay with Revitalizant can be combined with all types of motor oils, from full synthetic to mineral oils XADO Highway Atomic Metal Conditioner with revitalizant is effective for gasoline, LPG and diesel engines of passenger cars and small trucks with oil system up to 10 L Recommended to use during each oil change For a complete revitalization cycle it is recommended to use XADO Maximum 1 Stage (RF 100) Technology and certificates 3C EFFECT 3G generation Compensates current wear-out of engine Increases engine compression Restores lost oil pressure Protects metal parts from overheating and overloading Improves lubricating properties of oil and tribological characteristics of engine units Reduces fuel consumption Increases power and acceleration capability Decreases noise and vibration level Can double or triple the life of engine Decreases toxic carbon monoxide and dioxide emissions

ATOMEX DIESEL F8 COMPLEX IS A PRODUCT DESIGNED TO PROTECT DIESEL ENGINE AGAINST LOW-QUALITY FUEL. Improves the properties of low-quality fuel up to the level of brand marks. Insures engine operation on standard gasoline as if on sport gasoline. Reliably protects fuel system when using low-quality fuel. Even a single fueling with low-quality fuel may result in unstable operation and hampered engine start, clogging of fuel system, power decrease and fuel consumption increase. In some cases this cause failure of fuel equipment and sealing of a catalyst. Solution: application of the product, which eliminates negative effects of operation on low-quality fuel. Fueling with contaminated fuel and accidental water entry may cause breakdown of a high pressure fuel pump (wedging). Solution: revitalizant contained in the product will reliably protect fuel equipment parts, pump and plungers from wear. Ensures smooth and frictionless engine operation on fuel of any quality Reliably protects fuel system after accidental fueling Efficiently cleans all parts of the fuel system Improves fuel quality Removes moisture from diesel fuel Contributes to fuel economy Prevents early breakage of a particulate filter Due to the revitalizant, AtomEx F8 Complex Formula: Forms firm antiwear coating on the fuel equipment parts directly during the mechanism operation Restores pump* performance to the nominal level and improves fuel dispersion Protects plunger pistons during operation on low-quality fuel Increases performance reliability and extends service life of fuel system parts *tested for Common-Rail service systems (of the accumulator type) and Pumpe-Düse (pump-injector unit) APPLICATION INSTRUCTIONS Pour the product into a fuel tank before fueling NOTE The product is compatible with diesel fuel of all types, safe for particulate filters, catalyst converters and valves. Apply if necessary. Can be applied with every fueling. DOSAGE 250 ml of product for 40-60 L of fuel. PACKAGE Aerosol can 250 ml XA 40213

Revitalizant EX120 for Automatic Transmission & Worn Metal Extreme Action 120% (EX 120) Revitalizant rebuilds, repairs, and protects automobile transmission metal. It starts by filling in any scratches or worn surfaces in the transmission (gears, bearings, distribution blocks, clutches, etc), restoring geometry and reversing wear. EX120 then coats the treated surfaces with a self-regulating layer of ceramic-metal to protect the transmission from future wear. EX120 works in all types of automatic transmissions including Tiptronic, Steptronic, CVT, DSG etc. The best part about EX120 is one treatment lasts for 62,000 miles! With a 20% greater concentration of active agent, Extreme Action 120% (EX120) Revitalizant is more effective than ever repairing, rebuilding, and protecting worn metal surfaces. XADO’s Revitalizant technology has been independently tested and proven to work. *Compared to XADO gel-revitalizant for automatic transmissions. No matter how well a transmission is maintained, high heat and friction causes metal to become worn, scratched, and deformed over time. The destruction of the surface layer occurs in high-friction areas, where entire groups of atoms – clusters - may tear off under extreme loads. Until now there was no way to reverse this inevitable metal wear. EX120 starts repairing scratched and worn metal as soon as it is added to an automatic transmission. Revitalizant acts as a catalyst for rebuilding and repairing metal in areas of excessive thermal energy. It activates the absorption process of carbon through the surface layer which results in the formation of metal carbides. Revitalizant rebuilds metal at a molecular level, atom-by-atom. A new durable protective coating is formed with the help of carbides and metal particles. Because it has a self-regulating maximum thickness it does not cake. Diffusion of the protective layer into the metal results in an extra durable gradient coating with positive pressing stress forming along the entire treated surface in the final stage of Revitalization. The treated metal is now rebuilt and protected with diamond-like film of ceramic-metal, resulting in smoother operation and longer life. The dosage depends on the oil system capacity. Application: Ensure the syringe of Revitalizant EX120 is at room temperature so the contents flow freely. Add the necessary amount of the revitalizant into the transmission fluid reservoir. Drive the car normally. Revitalization is considered to be complete after 50 hours (approx. 1,500 km or 950 miles) of transmission operation. Dosage: Oil system capacity, L 5-8 9-12 13-15 Number of syringes (8 ml), pcs 1 2 3 Treatment procedure single single singleNote: A decrease in noise levels from the very first hour of operation is a sign that the revitalization process has begun. Some automobiles with excessive transmission wear may require an extra dose of EX120, especially when improvement is noticed then symptoms return. Revitalizant is compatible with all types of fluids for the automatic transmissions: Dexron®, Mercon®, Mopar®, CVT, etc. It does not enter into chemical reactions with transmission fluids or change their viscosity, friction or other physical-chemical properties. The protective metal-ceramic coating is formed on any operative mechanism, however, if the state of the mechanism (part) is in critical condition (100% wear), the worn part should be replaced. Keep out of reach of children. Avoid contact with skin and eyes. If swallowed, seek medical advice immediately and show this container or label. Avoid release to the environment; refer to special instructions/Material Safety Data Sheet. Material Safety Data Sheet is available for professional user on request. The dosage depends on the oil system capacity. Rebuilds and restores metal parts and protects them from future wear, reduces friction Eliminates surfaces defects Reduces noise and vibration Increases performance reliability and prolongs service life of control gears Protection from extreme friction and heat Allows transmission to operate in the event of low transmission fluid