Run-proof superglue in gel form enables precise application, even on overhead or vertical surfaces.
Gel-like nature largely prevents material from running
The adhesive hardens extremely quickly
For universal use
Adheres both smooth and absorbent surfaces
Quick and easy cap opening makes working easier
Solvent and silicone-free
It is advisable to wear safety gloves and safety goggles.
If surfaces are too dry or acidic, this will delay or prevent hardening, while higher levels of moisture and alkaline surfaces will have an accelerating effect.
Due to the high vapour pressure and moisture on the surrounding surfaces, a white deposit may appear around the point of adhesion (blooming effect). These are adhesive vapours that are hardening. These can be removed with e.g. acetone. However, it is important to note that the surfaces of the parts to be cleaned are also resistant to acetone. Blooming can be prevented/reduced by using the adhesive economically and ensuring sufficient air humidity and ventilation in the work area.
The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!
Due to the gel consistency, the cyanoacrylate structural adhesive is ideal for bonding tasks on overhead or vertical surfaces. The Klebfix GEL guarantees a stable bead and prevents accidental running of the adhesive. The superglue is suitable for bonding profile rubbers for wood and plastic windows, sign mounting, bonding of rubber seals, repairing broken edges, etc.
Good bonding of materials such as aluminium, steel, iron, copper, brass, paint, wood, MDF, chipboard, decorative panels, cork, cardboard, felt, leather, porcelain, fibre glass, rubber, plastics (such as hard PVC, ABS, PMMA) to and with each other. Not suitable for PP, PE, PTFE, silicone and bitumen.
The parts to be adhered must be clean, free from grease and dry. Apply a thin, even layer of adhesive to just one of the surfaces to be adhered. Apply sufficient pressure to make the connection immediately, in order to ensure complete contact. Best adhesive results are achieved using superglue primer. Use the activator to speed up the reaction of superglues. This can usually be used on all kinds of substrates, but please test it beforehand on a concealed section for compatibility.
Min./max. hardening time /conditions
20-100 s / Depending on the material
Min./max. tensile strength /conditions
2-15 N/mm² / in accordance with DIN 53288
Min./max. tensile strength
Min. combined tension and shear resistance
Max. gluing gap size
Min./max. temperature resistance
-40 to 85 °C
Min./max. processing temperature
5 to 20 °C
Shelf life from production/conditions
24 Month / cool and dry storage area
Weight of content