Tough removable screw retainer and sealing compound – single-handed dispensing system
High-strength bonding

Can only be removed once heated up to > 250°C
Suitable for screw connections exposed to high stresses

A 100 % seal is achieved – no additional securing parts are necessary
Protects against corrosion due to friction and against rust
Excellent media and thermal stability

Universal products with wide range of applications

Prevents detachment, e.g. through vibration and shock loads

No unwanted locking problems such as with mechanical screw retainers, for example

High resistance

Resistant to a large number of bases, gases, solvents, oils and fuels (see resistance list)

Silicone-free, solvent-free and oil-free

DOS system:

Practical one-handed operation thanks to the clever turn lock
One hand always remains free.

Continuously adjustable dispensing system
Dispensing can be adjusted to suit the application, and to keep consumption and costs to a minimum.

No residue material in dispensing neck
Costs optimised thanks to emptying with virtually no remaining product

The following plastics can be affected in the event of prolonged exposure: ABS, celluloid, polystyrene, polycarbonate (Macrolon), PMMA (Plexiglas), polysulfone, SAN (lurane, Tyril), Vinidur, vulcanised fibre and painted surfaces.

NSF-tested in accordance with NSF/ANSI 61 for use in service water and drinking water

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. If our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!

Chemical basis

Dimethacrylic acid ester


Green fluorescent


1.11 g/cm³ / in accordance with DIN EN ISO 2811-1

Min./max. viscosity /conditions

500-900 mPas / at 25°C, Brookfield RVT, spindle 2/20 rpm

Suitable for max. thread


Max. gap-filling ability

0.15 mm

Min./max. initial strength

5-15 min

Min./max. functional strength

1-3 h

Min./max. final strength

3 h-6 h

Min./max. compressive shearing strength /conditions

15-30 N/mm² / in accordance with ISO 10123

Min./max. breakaway torque

30-60 Nm

Breakaway torque conditions

DIN EN 15865

Min./max prevail torque

10-30 Nm

Conditions for prevail torque

DIN EN 15865

Min./max. processing temperature

5 to 35 °C

Min./max. temperature resistance

-55 to 150 °C

Min. flashing point

100 °C

Shelf life from production/conditions

18 Month / at room temperature

Weight of content
50 g





Fully hardening/curing conditions

Exclusion of oxygen and contact with metal (copper or iron ions)





There are no reviews yet.

Be the first to review “Wurth 0893270050 HIGH-STRENGTH SCREW RETAINER 50gr.”

Your email address will not be published. Required fields are marked *

Exclusive Offer Just for You!

A Special Gift Awaits on Orders Over €150
For every order exceeding €150, we’re excited to gift you a complimentary Loctite 5970 (50ml). It’s our way of saying ‘thank you’ for choosing us.