Replacement for solid seals around the engine, on pressure tanks as well as on screw connections.
High thermal stability

Also reliable at sealing at temperatures up to 280°C.

Compression-proof up to approx. 700 bar

Also suitable for high-pressure lines and pressure tanks.

Excellent adhesion

With the exception of metals and glass and ceramic surfaces, seals permanently and securely.

Good adaptability

Also suitable for uneven sealing surfaces
A complete seal is achieved
Permanently elastic

Prevents detachment, e.g. through vibration and shock loads

Protects against corrosion

Completely fills gaps.

Silicone- and solvent-free

DOS system:

Practical one-handed operation thanks to the clever turn lock
One hand always remains free.

Continuously adjustable dispensing system
Dispensing can be adjusted to suit the application, and to keep consumption and costs to a minimum.

No residue material in dispensing neck
Costs optimised thanks to emptying with virtually no remaining product

Notice
Not suitable as a cylinder head gasket. The following plastics can be affected in the event of prolonged exposure: polyvinyl, ABS, SAN, polysulphone, PVC, polycarbonate, polystyrene and painted surfaces.

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. If our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Please observe the technical data sheet!
Weight of content

100 g

Chemical basis

Epoxy resin

Colour

Red

Density/conditions

1.08 g/cm³ / in accordance with DIN EN ISO 2811-1

Min./max. viscosity /conditions

5500-6500 mPas / at 25°C, Brookfield RVT/RVT/HB, TP spindle 6/2.5 rpm

Max. pressure

690 bar

Min./max. working life

5-7 min

Min./max. skin-formation time

5-7 min

Min./max. temperature resistance

-50 to 280 °C

Min. flashing point

19 °C

Max. change in volume

25 %

Silicone-free

Yes

Shelf life from production/conditions

12 Month / at room temperature