Wurth 0893243025 MEDIUM-STRENGTH SCREW RETAINER 25gr.

Removable screw retainer and sealing compound – one-handed dispensing system
Removable screw retainer and sealing compound – one-handed dispensing system

Medium-strength bonding

Can be removed using normal tools

Can also be applied to stainless steel and passivated surfaces

No “accelerator” or “activator” required

Excellent media and thermal stability

Universal products with a wide range of application

Prevents detachment, e.g. through vibration and shock loads

No unwanted locking problems such as with mechanical screw retainers, for example

High resistance

Resistant to a large number of bases, gases, solvents, oils and fuels (see resistance list)

Silicone-free, solvent-free and oil-free

DOS system:

Practical one-handed operation thanks to the clever turn lock
One hand always remains free.

Continuously adjustable dispensing system
Dispensing can be adjusted to suit the application, and to keep consumption and costs to a minimum.

No residue material in dispensing neck
Costs optimised thanks to emptying with virtually no remaining product

Proof of Performance
NSF-tested in accordance with NSF/ANSI 61 for use in service water and drinking water
DVGW approval, tested in accordance with DIN EN 751-1 (not permissible in domestic gas installations in Germany in accordance with DVGW TRGI 2018.)
Conforms to the formula recommended by the German Environmental Protection Agency for use in applications which come into contact with drinking water dated 11 February 2016. If being used as a thread sealant which comes into contact with drinking water, please observe the relevant recommendations from the association of the adhesive and sealant industry.
Notice
The following plastics can be affected in the event of prolonged exposure: ABS, celluloid, polystyrene, polycarbonate (Macrolon), PMMA (Plexiglas), polysulfone, SAN (lurane, Tyril), Vinidur, vulcanised fibre, and painted surfaces.

Chemical basis

Dimethacrylic acid ester

Colour

Blue fluorescent

Density/conditions

1.12 g/cm³ / in accordance with DIN EN ISO 2811-1

Min./max. viscosity 1 /conditions 1

4000-9000 mPas / at 25°C, Brookfield RVT, spindle 3/2.5 rpm

Min./max. viscosity 2 /conditions 2

1500-3000 mPas / at 25°C, Brookfield RVT, spindle 3/20 rpm

Suitable for max. thread

M36

Max. gap-filling ability

0.25 mm

Min./max. initial strength

5-15 min

Min./max. functional strength

0.5-1 h

Min./max. final strength

1 h-3 h

Min./max. compressive shearing strength /conditions

10-20 N/mm² / in accordance with ISO 10123

Min./max. breakaway torque

15-25 Nm

Breakaway torque conditions

DIN EN 15865

Min./max prevail torque

3-8 Nm

Conditions for prevail torque

DIN EN 15865

Min./max. processing temperature

5 to 35 °C

Min./max. temperature resistance

-55 to 150 °C

Min. flashing point

100 °C

Shelf life from production/conditions

18 Month / at room temperature

Weight of content

25 g

Silicone-free

Yes

Solvent-free

Yes

Fully hardening/curing conditions

Exclusion of oxygen and contact with metal (copper or iron ions)

16.90

Wurth 0893243025 MEDIUM-STRENGTH SCREW RETAINER 25gr.

Category

Reviews

There are no reviews yet.

Be the first to review “Wurth 0893243025 MEDIUM-STRENGTH SCREW RETAINER 25gr.”

Your email address will not be published. Required fields are marked *

Exclusive Offer Just for You!

A Special Gift Awaits on Orders Over €150
For every order exceeding €150, we’re excited to gift you a complimentary Loctite 5970 (50ml). It’s our way of saying ‘thank you’ for choosing us.