Wurth 0893228 Sealant Dichtfix 310ml

Features and benefits

Very wide range of fit.
High Shore A hardness.
High tensile strength and high relative elongation at break.
Resistant to UV rays.
Can be varnished.
It does not contain isocyanates and silicone.
Adheres to many bases and without primer.
The material is not sensitive to mechanical loads.
The seam also withstands stronger movements/extensions.
Very good aging behavior even on unvarnished seams.
It can be varnished “wet on wet” up to five days after the formation of a hard coat with all standard varnishes (except alkyd resin varnishes). After that, for a better adhesion of the varnish, a primer should be applied once more.
It does not contain isocyanates and silicone.
Areas of application

Butt seals when changing parts in the area of the engine, trunk, chassis, shock absorbers, spare tire bed, etc.

Application method

The bases must be clean, dry, dust-free and degreased. Dichtfix to be applied with a Kombifix pneumatic gun, Art. No. 0891 628 6. The desired structures and thicknesses of the layer can be adjusted by the distance to the object or by the air pressure.

Instruction

Dichtfix should not come into contact with polyurethane materials that have not yet hardened. When painting with metallic lacquers, an anti-penetration primer must be applied. The best adhesion between the varnish and Dichtfix is achieved when the material is varnished as soon as possible after its application.

The instructions for use and operation provided by us are advisory and are based on our tests and trials. Due to the presence of numerous applications of the products, conditions of storage and operation, we do not take responsibility for a specific result obtained after using our product. To the extent that our free customer service provides technical information or acts as an advisory service, this liability is not assumed by the service in question, except where the advice or information provided falls within the scope of our specific, agreed upon service or the advisor acts intentionally. We guarantee constant quality of our products. We reserve the right to make technical changes and further develop our products.
Chemical base POP-mixed polymer
Density 1.48 g/cm3
Operating temperature +5°C to +30°C
Time to form the zipper 25 minutes
Curing speed About 3mm/24 hours
Shore A hardness (DIN 53505) 40
Elongation at break (ISO 37 DIN 53504) 270%
Tensile strength (DIN 53504) 1.6 N/mm²
Tear strength (ASTM D 624) 6.0 N/mm
Storage temperature From +5°C to +25°C
Maximum temperature resistance +80°C
Minimum temperature resistance -40°C

27.80

Wurth 0893228 Sealant Dichtfix 310ml

Category

Reviews

There are no reviews yet.

Be the first to review “Wurth 0893228 Sealant Dichtfix 310ml”

Your email address will not be published. Required fields are marked *

Exclusive Offer Just for You!

A Special Gift Awaits on Orders Over €150
For every order exceeding €150, we’re excited to gift you a complimentary Loctite 5970 (50ml). It’s our way of saying ‘thank you’ for choosing us.