- world wide delivery - No additional taxes
- For orders outside the European Union, please contact us first.
-35%
Wurth 071553370 MINI DIGITAL MULTIMETER
Original price was: 70.80€.45.80€Current price is: 45.80€.
Small measuring instrument for measuring direct and alternating current, resistance testing, continuity testing, diode testing and contactless voltage testing
Display: LCD, 2000 digits
Min./max. voltage measuring range: 0.5 V/AC-600 V/AC
Min./max. voltage measuring range 2: 0.5 V/DC-600 V/DC
Min. voltage measuring range 2: 0.5 V/DC
Max. voltage of measuring range 2: 600 V/DC
Min./max. electrical-resistance measuring range: 0 Ohm-20 MOhm
Automatic switch-off: 15min
Overvoltage protection category: CAT III/1000 V
IP protection class: IP 54
Battery designation: 1.5 V Micro AAA
Number of rechargeable batteries/batteries: 2 PCS
Length x width x height: 104 x 55 x 32.5 mm
Description
The measuring leads can be fastened to the rear of the device; this protects them from damage and prevents injury from the measuring tips
Permanently attached test leads, data hold, diode testing, continuity testing, integrated LED torch and automatic range detection
With robust, splash-proof rubber housing and membrane keyboard
Contactless voltage testing
Automatic switch-off of device after 15 minutes
Related products
Wurth 0890320 ENGINE SEALING COMPOUND SPECIAL 180
Permanently elastic silicone sealing compounds for engine and bodywork with excellent adhesion
- Cold-vulcanising silicone rubber
- Bridges larger unevenness
- Reliable at sealing, even after withstanding years of vibrations
- Does not run or pull threads
- Excellent adhesion and chemical resistance
- Skin formation after just a few minutes, vulcanisation rate approx. 1.5 mm/day
The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Wurth 0890321310 ENGINE SEALING SPECIAL 250 310ml
Permanently elastic silicone sealing compounds for engine and bodywork, brief temperature resistance of 300°C
- Cold-vulcanising silicone rubber
- Bridges larger unevenness
- Reliable at sealing, even after withstanding years of vibrations
- Excellent adhesion and chemical resistance
- Does not run or pull threads
- Skin formation after just a few minutes, vulcanisation rate approx. 1.5 mm/day
The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Wurth 08933311 SUPER RTV SILICONE BLACK 200gr.
High-quality adhesive and sealing compound for use in industry and the automotive sector.
Excellent resistance to chemicals
- Can also be used in critical areas in which the seal comes into contact with various liquids
- Outstanding resistance to engine oil and transmission oil, refrigerant and anti-freeze agent
Non-acidic hardening system
- Non-corrosive, therefore has no negative impact on electronic components and on lambda probes
Sealant in compressed-air can
- Easy to dispense without additional aids
- The fine beads allow the product to be applied uniformly
NoticeWhen sealing e.g. oil pans and gearboxes it is vital that no sealant gets into the interior. For this reason we recommend to apply the sealant on a joining part surface. Join both parts and then carefully press by hand and lightly slide against each other. Afterwards separate the parts again and then remove the sealant that has gone inside. Join the components again within a max. of 5 minutes and tighten firmly. Before commissioning, observe the hardening time (depending on the sealant thickness).
The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. We do not assume any liability for a specific application result due to the large number of applications and storage and processing conditions. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Wurth 08933316 ADHESIVE AND SEALING COMPOUND SUPER RTV SILICONE GREY
High-quality adhesive and sealing compound for use in industry and the automotive sector.
Excellent resistance to chemicals
- Can also be used in critical areas in which the seal comes into contact with various liquids
- Outstanding resistance to engine oil and transmission oil, refrigerant and anti-freeze agent
Non-acidic hardening system
- Non-corrosive, therefore has no negative impact on electronic components and on lambda probes
Sealant in compressed-air can
- Easy to dispense without additional aids
- The fine beads allow the product to be applied uniformly
NoticeWhen sealing e.g. oil pans and gearboxes it is vital that no sealant gets into the interior. For this reason we recommend to apply the sealant on a joining part surface. Join both parts and then carefully press by hand and lightly slide against each other. Afterwards separate the parts again and then remove the sealant that has gone inside. Join the components again within a max. of 5 minutes and tighten firmly. Before commissioning, observe the hardening time (depending on the sealant thickness).
The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. We do not assume any liability for a specific application result due to the large number of applications and storage and processing conditions. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Wurth 5848033450 CAR WINDSCREEN WIPER FLATBLADE PRO 450mm
Suitable for vehicles with OE fittings or hook attachments
Single flat blade available in 10 lengths
97% market coverage
Thanks to the availability of adapters for all conventional OE interfacesEasier installation
- "Click in" function
- The adapters are numbered for quicker identification
Optimal properties, even at high speeds (>130 km/h)
- Symmetrical spoiler
- Nano coating
Good wind resistance
Slimline design allows a good fit to the windscreenRefillable (replacement rubber wiper blade)
Environmentally friendly replacement of worn rubber parts
Wurth 5861001301 DIESEL PERFORMANCE IMPROVER 300ml
For lubricating passenger car and truck diesel systems.
Prevents deposits from building up in the combustion chamber and injection system
- Improves the lubricating effect of low-sulphur fuels
Therefore prevents surface abrasion and prevents the risk of the injection system malfunctioning.
- The storage stability of bio-diesel fuels is extended
Ensures precise diesel injection
- Lower fuel consumption
- Quiet engine running
Free from sulphur, phosphorous, metals and acids
Economical
300 ml is sufficient for 70 litres of diesel.
The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Wurth 5861101300 PETROL PERFORMANCE IMPROVER 300ml
For all petrol engines with and without a catalytic converter.
Cleans the fuel system
Reduces fuel consumption thanks to exact fuel preparationE10 suitability
- Protects from water occurring in fuel tank due to the hygroscopic property of E10 fuel
- Prevents corrosion
- Cleans deposits in the fuel system
Optimal combustion
Reduces the formation of harmful exhaust gases
The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Wurth 5861401150 ATF PERFORMANCE IMPROVER 150ml
For protecting automatic gearboxes
Protects against wear
Ensures the quality of gearbox shiftingStops foam forming in the gearbox and maintains the temperature at optimum operating level
Compatible with all oils for automatic gearboxesImproves shifting in cold ambient temperatures.
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications as well as storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by the provision of this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.
Reviews
There are no reviews yet.