Wurth 065604 Machine tap GL-HSSE M4

• Excellent sealing ability thanks to permanently plastic (non-hardening) properties
• Resistance to vibration guaranteed even after years of exposure
• No pulling of threads during application
• Does not run on vertical or downward-sloping surfaces
• Temperature-resistant from -50°C to +270°C; for brief periods up to +300°C
• Poor thermal conductivity
• Does not bond to metals or other materials chemically, prevents atmospheric corrosion
• Resistant to water, air, gasoline, kerosene, a variety of oils, synthetic lubricants, water/glycol and methanol mixtures, anti-freeze, fluorocarbon cooling agents
• Silicone-free
• Non-toxic

NSF registered, class P1, reg. no. 151822 The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Excellent resistance to chemicals

• Can also be used in critical areas in which the seal comes into contact with various liquids
• Outstanding resistance to engine oil and transmission oil, refrigerant and anti-freeze agent

 

Non-acidic hardening system

• Non-corrosive, therefore has no negative impact on electronic components and on lambda probes

 

Sealant in compressed-air can

• Easy to dispense without additional aids
• The fine beads allow the product to be applied uniformly

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. We do not assume any liability for a specific application result due to the large number of applications and storage and processing conditions. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

For cleaning the injection pump and nozzle

• Loosens and removes deposits, even in micro range
• Ensures clean combustion

 

Neutralises and binds acid condensation water

• Protects the fuel system from corrosion
• Cleans and protects from the tank through to the combustion chamber

 

Improves cetane number and reduces fuel-related “knocking”

 

Active agent concentrate based on synthetic components, as used in national and international diesel fuels.

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Extends the service life of the engine

• Protects against valves burning out
• Loosens deposits on resin-coated piston rings
• Removes oil sludge and unblocks clogged oil ducts
• Neutralises aggressive combustion acids
• Supplements used up engine oil ingredients

 

• Minimises friction resistance
• Suitable for oil diluted with biofuels
• Corresponds to latest API engine oil standards

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications as well as storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by the provision of this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.