Wurth 0624930400 HSS DIN 338 SMART STEP TWIST DRILL BIT 4.0mm

Can be used in almost any season

• 1-hour drive-away time for vehicle with airbag at an ambient temperature of -10 °C to +35 °C
• See technical data sheet for drive-away times for larger vehicles
• Suitable for vehicles with driver assistance systems

 

Safety tested

• Car drive-away time confirmed with crash test and TÜV certificate in accordance with FMVSS208/212
• Meets OEM requirements (original equipment manufacturers, vehicle manufacturers)

 

• High-modulus vehicle-strengthening window adhesive
• Suitable for aerials, non-conductive
• Ideal for use on aluminium, magnesium and hybrid bodywork, as it prevents contact corrosion

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Excellent resistance to chemicals

• Can also be used in critical areas in which the seal comes into contact with various liquids
• Outstanding resistance to engine oil and transmission oil, refrigerant and anti-freeze agent

 

Non-acidic hardening system

• Non-corrosive, therefore has no negative impact on electronic components and on lambda probes

 

Sealant in compressed-air can

• Easy to dispense without additional aids
• The fine beads allow the product to be applied uniformly

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. We do not assume any liability for a specific application result due to the large number of applications and storage and processing conditions. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Prevents deposits from building up in the combustion chamber and injection system

• Improves the lubricating effect of low-sulphur fuels

Therefore prevents surface abrasion and prevents the risk of the injection system malfunctioning.

• The storage stability of bio-diesel fuels is extended

Ensures precise diesel injection

• Lower fuel consumption
• Quiet engine running

 

Free from sulphur, phosphorous, metals and acids

Economical

300 ml is sufficient for 70 litres of diesel.

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Cleaning action

• Removes resinous and paint-like deposits in the micro range on injection valves and on the fuel distributor
• Ensures precise controlling of injection valves
• Less fuel is used thanks to precise fuel injection

 

• Binds and neutralises acidic condensation water
• Protects against corrosion

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.