Wurth 07150204 Monier pliers DIN 5242 200mm

High-modulus

For all popular vehicle types in passenger vehicle, commercial vehicle, bus, truck, agricultural and construction machine sectors  

Antenna compatible, non-conductive

 

Prevents contact corrosion

Suitable for use on aluminium-magnesium and hybrid bodywork (e. g. Audi A8, Jaguar XJ etc.)  

Tested safety

• Drive-away time confirmed with crash test and TÜV certificate in accordance with FMVSS208/212!
• Meets requirements of original equipment manufacturers (vehicle manufacturers)

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and carry out further development.

• Cold-vulcanising silicone rubber
• Bridges larger unevenness
• Reliable at sealing, even after withstanding years of vibrations
• Excellent adhesion and chemical resistance
• Does not run or pull threads
• Skin formation after just a few minutes, vulcanisation rate approx. 1.5 mm/day

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Single flat blade available in 10 lengths

 

97% market coverage

Thanks to the availability of adapters for all conventional OE interfaces

Easier installation

• "Click in" function
• The adapters are numbered for quicker identification

 

Optimal properties, even at high speeds (>130 km/h)

• Symmetrical spoiler
• Nano coating

 

Good wind resistance

Slimline design allows a good fit to the windscreen  

Refillable (replacement rubber wiper blade)

Environmentally friendly replacement of worn rubber parts

Cleans the inside of the engine and the oil supply system

Engines cleaned of dirt can now operate at their full performance level together with the clean oil.

• Quick and gentle cleaning process
• Does not attack seals
• Optimise exhaust gas emissions
• Compatible with catalytic converters
• Loosens jammed piston rings
• Easy to use
• A 400 ml can is sufficient for up to 5 litres of engine oil. 1000 ml is sufficient for 10–15 litres of oil

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.