MILWAUKEE 4933478450 impact wrench

For securing decorative and practical trims, emblems, lettering, panels and brackets in the automotive industry. In conjunction with mechanical fastening elements for securing spoilers. Excellent adhesion The tape offers excellent application reliability as soon as it is fitted. A very high final strength is achieved after a bonding time of 24 hours Adheres very well even to rough and slightly uneven substrates Foam backing The tape dampens vibrations and enables the various expansion behaviours of different materials to be compensated. High degree of resistance to temperatures, UV and weathering The adhesive tape can be used both indoors and outdoors Does not lose any adhesive force even at elevated temperatures Notice Recommended processing temperature 18°C to 35°C The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further Application area For fastening decorative and functional strips, lettering, emblems, panels and brackets in the automotive industry For affixing nameplates to machines In combination with mechanical fastening elements for spoiler mounting Instructions The surfaces to be adhered must be dry and free from dust, grease and silicone To ensure proper adhesion, the tape must be sufficiently pressed to the material to be adhered Optimum final strength is achieved after 24 hours With sensitive surfaces (e.g. PP, PE, rubber) and porous surfaces (e.g. wood, stone), please carry out preliminary tests If plastics containing plasticising additives are to be adhered, the plasticisers may change the adhesive layer. This will impair the strength of the adhesive (preliminary testing required) Adhesive base Acrylate Backing material Polyethylene foam Colour Anthracite (base material) Thickness 0.8 mm Adhesive force at 25 mm 19 N Elongation at break 300 % Min./max. temperature resistance -40 to 95 °C Min./max. surface processing temperature 5 to 40 °C Min. surface processing temperature 5 °C Max. surface processing temperature 40 °C Ultraviolet resistance Yes Moisture resistance Yes Conditions to maintain shelf life from production at 20°C and 50% humidity Width 12 mm Length 10 m