- world wide delivery - No additional taxes
- For orders outside the European Union, please contact us first.
Loctite 648 250ml low viscosity
149.80€
LOCTITE 648 is a low viscosity, high strength retaining compound with high temperature resistance. Ideal for retention of parts with a clearance or interference fit.
LOCTITE® 648 is designed for the bonding of cylindrical fitting parts. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. It exhibits a robust curing performance. The product also works on passive substrates and offers high-temperature performance and good oil tolerance.
- High temperature resistance
- Proven to be tolerant of minor contamination due to industrial oils
- Ideal for retention of parts with a clearance or interference fit
- High strength on all metals, including passive substrates (e.g. stainless steel)
- DVGW Approval (EN 751-1): NG 5146C00236
- P1 NSF Reg. No.: 148350
- WRAS Approval (BS 6920): 0808532
Related products
Loctite 222 50ml Threadlocker low strength
Threadlocking Adhesive - low strength. Easy disassembly. Suitable for all metal threaded assemblies.
LOCTITE® 222 is a low-strength threadlocker that allows the adjustment of screws including countersunk head screws and set screws. Good on low-strength metals which could fracture during disassembly, e.g. aluminium or brass. The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. t is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids.
- Ideal for low-strength threadlocking of adjusting screws, countersunk head screws and set screws
- Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
- Especially suited to small thread sizes
- Permits disassembly with hand tools
- P1 NSF Reg. No.: 123002
Loctite 3090 Two-Component Instant Adhesive 10g
LOCTITE 3090 is a 2-component, fast fixturing, gap-filling cyanoacrylate adhesive that works well on various substrates including most plastics, rubbers and metals.
LOCTITE® 3090 two-component cyanoacrylate adhesive is designed for the assembly of parts with varying or undefined bond gaps up to 5 mm, and/or for applications where the complete cure of excess adhesive is a must. The gel consistency prevents adhesive flow even on vertical surfaces. LOCTITE 3090 is also suited to bonding porous materials such as wood, paper, leather and fabric. Best application results are achieved with use of the LOCTITE cyanoacrylate mixing nozzle (contained in the kit).
- Fast curing
- Temperature resistance from -40 to +80 °C
- Gap filling up to 5 mm
- Gel consistency prevents adhesive flow, even on vertical surfaces
- Excellent bonding of all common substrates (metals, most plastics, rubber, wood, paper, ...)
- Precise and clean application with the syringe
- Perfect for all quick repairs of broken plastic parts and all types of emergency repair
Loctite 401 20g.
LOCTITE 401 is a general purpose, fast curing, instant adhesive that is ideal for use on porous substrates.
LOCTITE® 401 is a fast curing instant adhesive designed for the assembly of difficult-to-bond materials requiring uniform stress distribution and high tensile and/or shear strength. The product provides for the rapid bonding of a wide range of materials, including metals, plastics and elastomers. LOCTITE 401 is also suited to bonding porous materials such as wood, paper, leather and fabric. Perfect for all quick repairs and all types of small emergency repairs.
- Universal instant adhesive
- Very high strength on close-fitting parts
- Perfect for all quick repairs and all types of small emergency repairs.
- Bonds a wide range of similar or dissimilar substrates (metals, rubber, wood, cardboard, ceramics as well as most plastics)
Loctite 406 50g
LOCTITE 406 is a low viscosity, fast curing instant adhesive that is ideal for bonding plastics and elastomeric materials where very fast fixturing is required.
LOCTITE® 406 is an instant adhesive designed especially for the fast bonding of plastics and rubbers. This product offers exceptionally low viscosity. When combined with LOCTITE primers for cyanoacrylates, it can also be used on difficult-to-bond plastics.
- Rapid bonding of plastic & rubber, including EPDM
- LOCTITE 770 or LOCTITE 7239 primer improves adhesion of difficult-to-bond substrates
Loctite 4060 25g
LOCTITE HY 4070 is a 2-component, fast fixturing, cyanoacrylate/acrylic hybrid adhesive that works well on various substrates including most plastics, rubbers and metals.
LOCTITE® HY 4070 Universal Bonder is designed for the assembly of parts with bond gaps up to 0.2 in (5 mm), and/or for applications where the complete cure of excess adhesive is a must. The gel consistency prevents adhesive flow even on vertical surfaces. HY 4070 is ideally suited for applications where temperature and moisture resistance is required. Best application results are achieved with use of the LOCTITE cyanoacrylate mixing nozzle (contained in the 11 gram kit).
- Fast fixturing
- Moisture resistant
- Temperature resistance from -40 to +100°C
- Gap filling up to 5 mm
- Gel consistency prevents adhesive flow, even on vertical surfaces.
- Excellent bonding characteristics to a variety of substrates including plastics, rubbers, and metals
Loctite 454 20g. Universal instant adhesive
LOCTITE 454 is a general purpose, non-drip gel, instant adhesive that is ideal for vertical surfaces and overhead applications.
LOCTITE® 454 is an instant adhesive designed for the assembly of difficult-to-bond materials which require uniform stress distribution and high tensile and/or shear strength. The product provides for the rapid bonding of a wide range of materials, including metals, plastics and elastomers. The gel consistency enables overhead and vertical application. LOCTITE 454 is also suited to bonding porous materials such as wood, paper, leather and fabric. Perfect for all quick repair jobs.
- Universal instant adhesive gel
- Will not drip or run
- Perfect for all quick repairs
- Ideal for overhead application and vertical faces
- Non-wicking, specially suited to porous materials
- Bonds similar or dissimilar substrate combinations of wood, metals, ceramics, most plastics
Loctite 4860 20g.
Flexible, high viscosity, bendable instant adhesive. Especially suitable for porous or absorbent surfaces.
LOCTITE® 4860 is a transparent, colourless, high viscosity, ethyl-based instant adhesive which is formulated specifically to provide flexible and bendable bond lines in materials that include plastics, rubbers and metals. When used to bond rubbers, for example, it maintains the full compressibility of the joint. It is well suited to the rapid bonding of porous surfaces.
- Offers flexible, bendable bond lines
- Highly suitable for porous or absorbent surfaces
- High viscosity
- Rapid fixture time 3 - 10 secs.
Loctite 495 500g.
General purpose, low viscosity instant adhesive. Offers fast bonding on a wide range of materials.
LOCTITE® 495 is a transparent, colourless, low viscosity, general purpose ethyl-based instant adhesive offering fast bonding (5-20 secs fixture time). It is able to bond a wide range of materials, including plastics, rubbers and metals. It can also bond polyolefins when used in combination with Primer LOCTITE® SF 770 or LOCTITE® SF 7239. Available in 20 g, 50 g and 500 g pack sizes.
- General purpose
- Low viscosity
- 10 - 20 secs. fixture time
- Colourless and transparent
Reviews
There are no reviews yet.