- world wide delivery - No additional taxes
- For orders outside the European Union, please contact us first.
Loctite 5699 80ml. water glycol resistant gasketing
Original price was: 18.90€.14.90€Current price is: 14.90€.
Loctite 5966 300ml. water/glycol resistant gasketing
46.80€
LOCTITE SI 5699 is a water/glycol resistant gasketing product, ideal for use on flexible flanges, machined or cast surfaces, metal or plastic.
LOCTITE® SI 5699 is a flexible silicone sealant and cures on exposure to moisture in the air to form a tough rubber gasket. The product is designed primarily for flange sealing with excellent oil resistance or rigid flange sealing for example on transmissions and cast metal housings. It is tack-free after just 10 min. The product is water-glycol resistant and can be used on machined or cast surfaces, metal or plastic.
- Ideal for sealing all types of flanges including stamped sheet metal covers where water-glycol resistance is required
- Tack-free after 10 min.
- P1 NSF Reg. No.: 122998
-
Technical Information
Applications Highly Flexible Assembly Gasketing Color Gray Extrusion Rate 200.0 g/min. Key Characteristics Oil Resistance: Increased Oil Resistance Operating Temperature -65.0 – 400.0 °F (-55.0 – 200.0 °C ) Substrates Metal, Plastic Tack Free Time 30.0 min.
Related products
Loctite 222 50ml Threadlocker low strength
Threadlocking Adhesive - low strength. Easy disassembly. Suitable for all metal threaded assemblies.
LOCTITE® 222 is a low-strength threadlocker that allows the adjustment of screws including countersunk head screws and set screws. Good on low-strength metals which could fracture during disassembly, e.g. aluminium or brass. The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. t is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids.
- Ideal for low-strength threadlocking of adjusting screws, countersunk head screws and set screws
- Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
- Especially suited to small thread sizes
- Permits disassembly with hand tools
- P1 NSF Reg. No.: 123002
Loctite 241 50ml low viscosity threadlocker
Medium strength, low viscosity threadlocking adhesive. Formulated for small metal threads up to M12.
LOCTITE® 241 is a methacrylate-based threadlocking adhesive designed for medium strength applications on small threads. Typical fixture times are 35, 12 and 240 minutes on steel, brass and stainless steel respectively. Offering low viscosity and a breakaway torque of 11.5 Nm, the product is intended for fasteners that require normal disassembly with standard hand tools.
- Medium strength
- Low viscosity
- Designed for small threads
- Various pack sizes
Loctite 401 3g
LOCTITE 401 is a general purpose, fast curing, instant adhesive that is ideal for use on porous substrates.
LOCTITE® 401 is a fast curing instant adhesive designed for the assembly of difficult-to-bond materials requiring uniform stress distribution and high tensile and/or shear strength. The product provides for the rapid bonding of a wide range of materials, including metals, plastics and elastomers. LOCTITE 401 is also suited to bonding porous materials such as wood, paper, leather and fabric. Perfect for all quick repairs and all types of small emergency repairs.
- Universal instant adhesive
- Very high strength on close-fitting parts
- Perfect for all quick repairs and all types of small emergency repairs.
- Bonds a wide range of similar or dissimilar substrates (metals, rubber, wood, cardboard, ceramics as well as most plastics)
Loctite 406 20g.
LOCTITE 406 is a low viscosity, fast curing instant adhesive that is ideal for bonding plastics and elastomeric materials where very fast fixturing is required.
LOCTITE® 406 is an instant adhesive designed especially for the fast bonding of plastics and rubbers. This product offers exceptionally low viscosity. When combined with LOCTITE primers for cyanoacrylates, it can also be used on difficult-to-bond plastics.
- Rapid bonding of plastic & rubber, including EPDM
- LOCTITE 770 or LOCTITE 7239 primer improves adhesion of difficult-to-bond substrates
loctite 4060 25g.
General purpose structural adhesive that provides a high strength combined with fast fixture at room temperature.
LOCTITE® HY 4060GY™ is a two component, general purpose structural adhesive that provides a high strength combined with fast fixture at room temperature. LOCTITE HY 4060GY provides good temperature and moisture resistance which also makes it suitable for applications in high temperature/humidity environments. It is designed to bond a variety of substrates including metals, most plastics and rubbers. This product is ready-to-use and can be dispensed directly from the pack without additional equipment. The two colored components of LOCTITE HY 4060GY allow for indication of proper mixing.
Loctite 435 20g
Transparent, colourless, toughened humidity-cured ethyl-based instant adhesive. Well suited to plastics, rubbers, metals and porous/acidic surfaces.
LOCTITE® 435 is a colourless, toughened, ethyl-based instant adhesive. It has a fixture time of 10 - 20 secs. It has high resistance to impact and shock loads, high peel strength and is suitable for bonding plastics, rubber, metals, porous and absorbent substrates and acidic surfaces. Good resistance in humid environments.
- Toughened, clear
- Ideal for bonding small to medium-size parts
- Well suited to metals, rubbers and plastics
- Fixture time of 10 - 20 secs.
- Well suited to porous and/or acidic surfaces
- Solvent-free
Loctite 4850 20g.
Instant Adhesive - flexible and bendable. Low viscosity. Ideal for use on porous and adsorbent substrates and acidic surfaces.
LOCTITE® 4850 is an instant adhesive designed for the assembly of difficult-to-bond materials and is specifically formulated to provide flexible bond lines. It is a low-viscous product that provides for the rapid bonding of a wide range of materials, including metals, plastics and rubbers. When used to bond rubbers, for example, this product ensures retention of the full compressibility of the joint. LOCTITE 4850 is also particularly suited to bonding porous or absorbent materials such as paper, leather and fabrics.
- Instant, flexible adhesive
- Low viscosity
- Bonds a wide range of similar or dissimilar substrates (metals, rubber, wood, cardboard, ceramics as well as most plastics)
Loctite 496 20g.
Low viscosity instant adhesive formulated primarily for bonding metals. Also bonds plastics, rubbers and polyolefins. 10 - 30 secs fixture time.
LOCTITE® 496 is a transparent, colourless, low viscosity, general purpose, methyl-based instant adhesive that is particularly suited to bonding metals. Other materials bonded include plastics and rubbers, as well as polyolefins (in combination with Primer LOCTITE® SF 770 or LOCTITE® SF 7239). It offers a fixture time of 10 - 30 secs. It is available in 20 g, 50 g and 500 g pack sizes.
- Also bonds plastics, rubbers and polyolefins
- Particularly suited to metals
- 10 - 30 secs. fixture time
- Low viscosity
Reviews
There are no reviews yet.