- world wide delivery - No additional taxes
- For orders outside the European Union, please contact us first.
Loctite 577 50ml.
47.90€
Medium-strength, general purpose thread sealant for straight/straight and straight/taper threads and fittings. Fills the space between threaded parts and seals and locks at the same time.
LOCTITE® 577 is designed for the locking and sealing of metal pipes and fittings as well as other threaded assemblies. The product provides an instant, low-pressure seal for metal pipes and fittings. It will not creep, shrink or shred. It has excellent chemical and thermal resistance and offers less migration of liquid product after application.
- Excellent chemical resistance
- Instant low pressure seal
- Suitable for all metals
- Medium-strength, general purpose thread sealant for sealing metal threads
- Locks connection against vibration-induced loosening and other stresses
- Easy to apply
- Cures on active and inactive metals
- NSF P1 Reg. No. 123001
- DVGW Approval (EN 751-1): DVGW Reg. No. NG-5146CQ0312
-
Technical Information
Agency Approvals / Specifications DVGW, NSF, WRAS Application Method Dispense System, Manual Applications Pipe Sealing, Thread Sealing Breakaway Torque, Steel M10 33.0 N·m (295.0 in./lb. ) Color Yellow Cure Type Anaerobic Cure Key Characteristics Chemical Resistant, Fluorescent, General Purpose, Immediate Low Pressure Sealing, Strength: Medium Strength, Surface Contamination-Tolerant, Temperature: High Temperature, Thixotropic Operating Temperature -55.0 – 150.0 °C (-65.0 – 300.0 °F ) Physical Form Paste Substrates Metal, Metal: Passive Metal, Thread Type: Tapered Technology Acrylic Viscosity, 20 RPM 25000.0 mPa·s
Related products
Loctite 241 50ml low viscosity threadlocker
Medium strength, low viscosity threadlocking adhesive. Formulated for small metal threads up to M12.
LOCTITE® 241 is a methacrylate-based threadlocking adhesive designed for medium strength applications on small threads. Typical fixture times are 35, 12 and 240 minutes on steel, brass and stainless steel respectively. Offering low viscosity and a breakaway torque of 11.5 Nm, the product is intended for fasteners that require normal disassembly with standard hand tools.
- Medium strength
- Low viscosity
- Designed for small threads
- Various pack sizes
Loctite 3090 Two-Component Instant Adhesive 10g
LOCTITE 3090 is a 2-component, fast fixturing, gap-filling cyanoacrylate adhesive that works well on various substrates including most plastics, rubbers and metals.
LOCTITE® 3090 two-component cyanoacrylate adhesive is designed for the assembly of parts with varying or undefined bond gaps up to 5 mm, and/or for applications where the complete cure of excess adhesive is a must. The gel consistency prevents adhesive flow even on vertical surfaces. LOCTITE 3090 is also suited to bonding porous materials such as wood, paper, leather and fabric. Best application results are achieved with use of the LOCTITE cyanoacrylate mixing nozzle (contained in the kit).
- Fast curing
- Temperature resistance from -40 to +80 °C
- Gap filling up to 5 mm
- Gel consistency prevents adhesive flow, even on vertical surfaces
- Excellent bonding of all common substrates (metals, most plastics, rubber, wood, paper, ...)
- Precise and clean application with the syringe
- Perfect for all quick repairs of broken plastic parts and all types of emergency repair
Loctite 401 3g
LOCTITE 401 is a general purpose, fast curing, instant adhesive that is ideal for use on porous substrates.
LOCTITE® 401 is a fast curing instant adhesive designed for the assembly of difficult-to-bond materials requiring uniform stress distribution and high tensile and/or shear strength. The product provides for the rapid bonding of a wide range of materials, including metals, plastics and elastomers. LOCTITE 401 is also suited to bonding porous materials such as wood, paper, leather and fabric. Perfect for all quick repairs and all types of small emergency repairs.
- Universal instant adhesive
- Very high strength on close-fitting parts
- Perfect for all quick repairs and all types of small emergency repairs.
- Bonds a wide range of similar or dissimilar substrates (metals, rubber, wood, cardboard, ceramics as well as most plastics)
Loctite 406 500g
LOCTITE 406 is a low viscosity, fast curing instant adhesive that is ideal for bonding plastics and elastomeric materials where very fast fixturing is required.
LOCTITE® 406 is an instant adhesive designed especially for the fast bonding of plastics and rubbers. This product offers exceptionally low viscosity. When combined with LOCTITE primers for cyanoacrylates, it can also be used on difficult-to-bond plastics.
- Rapid bonding of plastic & rubber, including EPDM
- LOCTITE 770 or LOCTITE 7239 primer improves adhesion of difficult-to-bond substrates
Loctite 460 20g.
Low odour, low bloom, low viscosity, alkoxyethyl-based instant adhesive. Particularly suitable for absorbent surfaces.
LOCTITE® 460 is a transparent, colourless, low viscosity, low odour, low blooming alkoxyethyl-based product which provides rapid bonding (5-20 secs.) of a wide range of materials, including metals, plastics and elastomers. It is particularly suitable for applications where vapour control is difficult and is well suited to bonding porous or absorbent materials.
- Low bloom for cosmetic applications
- Low odour for applications where vapour control is vital
- Low viscosity
- Well suited to porous substrates
Loctite 460 500g.
Low odour, low bloom, low viscosity, alkoxyethyl-based instant adhesive. Particularly suitable for absorbent surfaces.
LOCTITE® 460 is a transparent, colourless, low viscosity, low odour, low blooming alkoxyethyl-based product which provides rapid bonding (5-20 secs.) of a wide range of materials, including metals, plastics and elastomers. It is particularly suitable for applications where vapour control is difficult and is well suited to bonding porous or absorbent materials.
- Low bloom for cosmetic applications
- Low odour for applications where vapour control is vital
- Low viscosity
- Well suited to porous substrates
Loctite 4850 20g.
Instant Adhesive - flexible and bendable. Low viscosity. Ideal for use on porous and adsorbent substrates and acidic surfaces.
LOCTITE® 4850 is an instant adhesive designed for the assembly of difficult-to-bond materials and is specifically formulated to provide flexible bond lines. It is a low-viscous product that provides for the rapid bonding of a wide range of materials, including metals, plastics and rubbers. When used to bond rubbers, for example, this product ensures retention of the full compressibility of the joint. LOCTITE 4850 is also particularly suited to bonding porous or absorbent materials such as paper, leather and fabrics.
- Instant, flexible adhesive
- Low viscosity
- Bonds a wide range of similar or dissimilar substrates (metals, rubber, wood, cardboard, ceramics as well as most plastics)
Loctite 496 20g.
Low viscosity instant adhesive formulated primarily for bonding metals. Also bonds plastics, rubbers and polyolefins. 10 - 30 secs fixture time.
LOCTITE® 496 is a transparent, colourless, low viscosity, general purpose, methyl-based instant adhesive that is particularly suited to bonding metals. Other materials bonded include plastics and rubbers, as well as polyolefins (in combination with Primer LOCTITE® SF 770 or LOCTITE® SF 7239). It offers a fixture time of 10 - 30 secs. It is available in 20 g, 50 g and 500 g pack sizes.
- Also bonds plastics, rubbers and polyolefins
- Particularly suited to metals
- 10 - 30 secs. fixture time
- Low viscosity
Reviews
There are no reviews yet.