- world wide delivery - No additional taxes
- For orders outside the European Union, please contact us first.
Loctite 577 250ml.
140.80€
Medium-strength, general purpose thread sealant for straight/straight and straight/taper threads and fittings. Fills the space between threaded parts and seals and locks at the same time.
LOCTITE® 577 is designed for the locking and sealing of metal pipes and fittings as well as other threaded assemblies. The product provides an instant, low-pressure seal for metal pipes and fittings. It will not creep, shrink or shred. It has excellent chemical and thermal resistance and offers less migration of liquid product after application.
- Excellent chemical resistance
- Instant low pressure seal
- Suitable for all metals
- Medium-strength, general purpose thread sealant for sealing metal threads
- Locks connection against vibration-induced loosening and other stresses
- Easy to apply
- Cures on active and inactive metals
- NSF P1 Reg. No. 123001
- DVGW Approval (EN 751-1): DVGW Reg. No. NG-5146CQ0312
-
Technical Information
Agency Approvals / Specifications DVGW, NSF, WRAS Application Method Dispense System, Manual Applications Pipe Sealing, Thread Sealing Breakaway Torque, Steel M10 33.0 N·m (295.0 in./lb. ) Color Yellow Cure Type Anaerobic Cure Key Characteristics Chemical Resistant, Fluorescent, General Purpose, Immediate Low Pressure Sealing, Strength: Medium Strength, Surface Contamination-Tolerant, Temperature: High Temperature, Thixotropic Operating Temperature -55.0 – 150.0 °C (-65.0 – 300.0 °F ) Physical Form Paste Substrates Metal, Metal: Passive Metal, Thread Type: Tapered Technology Acrylic Viscosity, 20 RPM 25000.0 mPa·s
Related products
Loctite 403 20g
Low odour, low bloom alkoxyethyl instant adhesive. Particularly suitable for absorbent surfaces. Medium viscosity.
LOCTITE® 403 is a medium viscosity, low odour, low blooming alkoxyethyl-based product is particularly suitable for applications where vapour control is difficult. It provides rapid bonding of a wide range of materials, including metals, plastics and elastomers. It is particularly suitable for bonding porous or absorbent materials.
- Low odour for applications where vapour control is vital
- Low bloom for cosmetic applications
- Transparent and colourless
- Well suited to porous substrates
Loctite 406 20g.
LOCTITE 406 is a low viscosity, fast curing instant adhesive that is ideal for bonding plastics and elastomeric materials where very fast fixturing is required.
LOCTITE® 406 is an instant adhesive designed especially for the fast bonding of plastics and rubbers. This product offers exceptionally low viscosity. When combined with LOCTITE primers for cyanoacrylates, it can also be used on difficult-to-bond plastics.
- Rapid bonding of plastic & rubber, including EPDM
- LOCTITE 770 or LOCTITE 7239 primer improves adhesion of difficult-to-bond substrates
Loctite 4060 25g
LOCTITE HY 4070 is a 2-component, fast fixturing, cyanoacrylate/acrylic hybrid adhesive that works well on various substrates including most plastics, rubbers and metals.
LOCTITE® HY 4070 Universal Bonder is designed for the assembly of parts with bond gaps up to 0.2 in (5 mm), and/or for applications where the complete cure of excess adhesive is a must. The gel consistency prevents adhesive flow even on vertical surfaces. HY 4070 is ideally suited for applications where temperature and moisture resistance is required. Best application results are achieved with use of the LOCTITE cyanoacrylate mixing nozzle (contained in the 11 gram kit).
- Fast fixturing
- Moisture resistant
- Temperature resistance from -40 to +100°C
- Gap filling up to 5 mm
- Gel consistency prevents adhesive flow, even on vertical surfaces.
- Excellent bonding characteristics to a variety of substrates including plastics, rubbers, and metals
loctite 4060 25g.
General purpose structural adhesive that provides a high strength combined with fast fixture at room temperature.
LOCTITE® HY 4060GY™ is a two component, general purpose structural adhesive that provides a high strength combined with fast fixture at room temperature. LOCTITE HY 4060GY provides good temperature and moisture resistance which also makes it suitable for applications in high temperature/humidity environments. It is designed to bond a variety of substrates including metals, most plastics and rubbers. This product is ready-to-use and can be dispensed directly from the pack without additional equipment. The two colored components of LOCTITE HY 4060GY allow for indication of proper mixing.
Loctite 422 50g
Transparent, colourless, high viscosity ethyl-based general purpose instant adhesive.
LOCTITE® 422 is a transparent, colourless, high viscosity, general purpose ethyl-based instant adhesive. Suitable for metals, rubbers and plastic, it is also suitable for polyolefins in combination with Primer LOCTITE® SF 770 or LOCTITE® SF 7239. It has a fixture time of 20 - 40 secs.
- Cures very quickly when confined between two surfaces
- Suitable for metals, rubbers and plastics
- Excellent adhesion to most substrates
- Fixture time of 20 - 40 secs.
- Ideal for bonding small to medium-size parts
- Solvent-free
- High viscosity
Loctite 454 20g. Universal instant adhesive
LOCTITE 454 is a general purpose, non-drip gel, instant adhesive that is ideal for vertical surfaces and overhead applications.
LOCTITE® 454 is an instant adhesive designed for the assembly of difficult-to-bond materials which require uniform stress distribution and high tensile and/or shear strength. The product provides for the rapid bonding of a wide range of materials, including metals, plastics and elastomers. The gel consistency enables overhead and vertical application. LOCTITE 454 is also suited to bonding porous materials such as wood, paper, leather and fabric. Perfect for all quick repair jobs.
- Universal instant adhesive gel
- Will not drip or run
- Perfect for all quick repairs
- Ideal for overhead application and vertical faces
- Non-wicking, specially suited to porous materials
- Bonds similar or dissimilar substrate combinations of wood, metals, ceramics, most plastics
Loctite 460 500g.
Low odour, low bloom, low viscosity, alkoxyethyl-based instant adhesive. Particularly suitable for absorbent surfaces.
LOCTITE® 460 is a transparent, colourless, low viscosity, low odour, low blooming alkoxyethyl-based product which provides rapid bonding (5-20 secs.) of a wide range of materials, including metals, plastics and elastomers. It is particularly suitable for applications where vapour control is difficult and is well suited to bonding porous or absorbent materials.
- Low bloom for cosmetic applications
- Low odour for applications where vapour control is vital
- Low viscosity
- Well suited to porous substrates
Loctite 495 500g.
General purpose, low viscosity instant adhesive. Offers fast bonding on a wide range of materials.
LOCTITE® 495 is a transparent, colourless, low viscosity, general purpose ethyl-based instant adhesive offering fast bonding (5-20 secs fixture time). It is able to bond a wide range of materials, including plastics, rubbers and metals. It can also bond polyolefins when used in combination with Primer LOCTITE® SF 770 or LOCTITE® SF 7239. Available in 20 g, 50 g and 500 g pack sizes.
- General purpose
- Low viscosity
- 10 - 20 secs. fixture time
- Colourless and transparent
Reviews
There are no reviews yet.