- world wide delivery - No additional taxes
- For orders outside the European Union, please contact us first.
Loctite 510 50ml. high temperature and chemical
43.40€
LOCTITE 510 is a high temperature and chemical resistant gasketing product that is ideal for use on rigid flanges.
LOCTITE® 510 is a high temperature resistant anaerobic sealant which cures when confined in the absence of air between close-fitting metal surfaces. Typical applications include sealing rigid flange faces on transmissions and engine casings. It ensures an instant, low-pressure seal. The product increases the torque capacity of assembled flanges.
- For metal flanges
- High temperature resistant flange gasket
- Adapts to flange surface irregularities and scratches up to 0.25 mm
- Increases the torque capacity of assembled flanges
- P1 NSF Reg. No.: 123007
Related products
Loctite 222 50ml Threadlocker low strength
Threadlocking Adhesive - low strength. Easy disassembly. Suitable for all metal threaded assemblies.
LOCTITE® 222 is a low-strength threadlocker that allows the adjustment of screws including countersunk head screws and set screws. Good on low-strength metals which could fracture during disassembly, e.g. aluminium or brass. The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. t is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids.
- Ideal for low-strength threadlocking of adjusting screws, countersunk head screws and set screws
- Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
- Especially suited to small thread sizes
- Permits disassembly with hand tools
- P1 NSF Reg. No.: 123002
Loctite 406 20g.
LOCTITE 406 is a low viscosity, fast curing instant adhesive that is ideal for bonding plastics and elastomeric materials where very fast fixturing is required.
LOCTITE® 406 is an instant adhesive designed especially for the fast bonding of plastics and rubbers. This product offers exceptionally low viscosity. When combined with LOCTITE primers for cyanoacrylates, it can also be used on difficult-to-bond plastics.
- Rapid bonding of plastic & rubber, including EPDM
- LOCTITE 770 or LOCTITE 7239 primer improves adhesion of difficult-to-bond substrates
Loctite 406 50g
LOCTITE 406 is a low viscosity, fast curing instant adhesive that is ideal for bonding plastics and elastomeric materials where very fast fixturing is required.
LOCTITE® 406 is an instant adhesive designed especially for the fast bonding of plastics and rubbers. This product offers exceptionally low viscosity. When combined with LOCTITE primers for cyanoacrylates, it can also be used on difficult-to-bond plastics.
- Rapid bonding of plastic & rubber, including EPDM
- LOCTITE 770 or LOCTITE 7239 primer improves adhesion of difficult-to-bond substrates
loctite 4060 25g.
General purpose structural adhesive that provides a high strength combined with fast fixture at room temperature.
LOCTITE® HY 4060GY™ is a two component, general purpose structural adhesive that provides a high strength combined with fast fixture at room temperature. LOCTITE HY 4060GY provides good temperature and moisture resistance which also makes it suitable for applications in high temperature/humidity environments. It is designed to bond a variety of substrates including metals, most plastics and rubbers. This product is ready-to-use and can be dispensed directly from the pack without additional equipment. The two colored components of LOCTITE HY 4060GY allow for indication of proper mixing.
Loctite 460 20g.
Low odour, low bloom, low viscosity, alkoxyethyl-based instant adhesive. Particularly suitable for absorbent surfaces.
LOCTITE® 460 is a transparent, colourless, low viscosity, low odour, low blooming alkoxyethyl-based product which provides rapid bonding (5-20 secs.) of a wide range of materials, including metals, plastics and elastomers. It is particularly suitable for applications where vapour control is difficult and is well suited to bonding porous or absorbent materials.
- Low bloom for cosmetic applications
- Low odour for applications where vapour control is vital
- Low viscosity
- Well suited to porous substrates
Loctite 480 20g High-Strength, Flexible Adhesive
LOCTITE 480 is a toughened, fast curing instant adhesive that is ideal for bonding metal to metal, rubber or magnets, particularly in humid environments.
LOCTITE® 480 is an instant adhesive designed for the assembly of difficult-to-bond materials which require uniform stress distribution and high tensile and/or shear strength. It is a rubber-reinforced adhesive offering increased flexibility and peel strength along with enhanced shock resistance. The product provides rapid bonding for a wide range of materials, including metals, plastics and rubbers. LOCTITE 480 exhibits good resistance in humid environments.
For applications where shock resistance is required or shock or peel loads are present
Ideal for bonding metal to metal, to rubber or magnets
Good resistance in humid environments
https://www.youtube.com/watch?v=JOg5cow8wj4
Loctite 480 500g. High Strength Flexible Adhesive
LOCTITE 480 is a toughened, fast curing instant adhesive that is ideal for bonding metal to metal, rubber or magnets, particularly in humid environments.
LOCTITE® 480 is an instant adhesive designed for the assembly of difficult-to-bond materials which require uniform stress distribution and high tensile and/or shear strength. It is a rubber-reinforced adhesive offering increased flexibility and peel strength along with enhanced shock resistance. The product provides rapid bonding for a wide range of materials, including metals, plastics and rubbers. LOCTITE 480 exhibits good resistance in humid environments.
For applications where shock resistance is required or shock or peel loads are present
Ideal for bonding metal to metal, to rubber or magnets
Good resistance in humid environments
https://www.youtube.com/watch?v=JOg5cow8wj4
Loctite 4860 20g.
Flexible, high viscosity, bendable instant adhesive. Especially suitable for porous or absorbent surfaces.
LOCTITE® 4860 is a transparent, colourless, high viscosity, ethyl-based instant adhesive which is formulated specifically to provide flexible and bendable bond lines in materials that include plastics, rubbers and metals. When used to bond rubbers, for example, it maintains the full compressibility of the joint. It is well suited to the rapid bonding of porous surfaces.
- Offers flexible, bendable bond lines
- Highly suitable for porous or absorbent surfaces
- High viscosity
- Rapid fixture time 3 - 10 secs.
Reviews
There are no reviews yet.